答：廢塑料的出油率很復雜，不同的廢塑料出油率都不一樣，相差很多。我下邊的客戶多用于再生紙廠的下腳料，按濕的標準來計算，一般1噸料(2.5m3~3m3左右)煉一桶毛油(一桶毛油180kg左右，冬季有時可裝195~200kg);含水分5~6%的干料，紙漿也分選過了，出油率最高可達到60%;其他廢料如廢棄農膜，編織袋，蓋大樓的安全網等一般不低于50%;至于特殊一點的廢塑料，需經過實驗室化驗。

　　廢輪胎出油率：輪胎的出油率在45%~50%左右(美國微波煉油可達到52%，我們國家現在還沒有這技術。)

　　本公司擁有一流的實驗室和煉油廠，隨時可做免費化驗生產，以檢查你的原料實際出油率。

　　A: Different oil yield rate. Most of our customers use scraps offcut from recycled paper plant. According to the wet raw materials, 1tin of materials(2.5m3~3m3)can refine to a barrel of Crude Oil (per barrel crude oil is around 180kg, 195~200kg in winter ); As to dry material with moisture of 5% to 6% and paper pulp has been the separation, the oil yield rate can be up to 60%; Other wastes such as wastes agricultural film, bags, building safety nets, the oil yield rate is not less than 50%; there need laboratory tests for other special plastics waste.

　　Scrap tires oil yield rate: 45%~50%

　　We have fist-class laboratories and refineries to help you check actual oil yield of your raw materials.